• info@gypelite.com
  • 1800 572 9981

TOUGH PLASTERS

High performance at a pocket friendly cost - that’s Gypelite Tough Plasters. We make your walls shining. Gypsum plasters are a replacement for Sand Cement plastering and have been used for centuries across the globe. From the Egyptian pyramids too.
Made of 100% natural gypsum

  • Great coverage.
  • High impact resistance.
  • Less water usage.
  • Less structural load.
  • High fire resistance.
  • Low thermal conductivity.
NO

SAND

NO

SHRINKAGE

NO

CRACKS

NO

CURING

At Gypelite we always think GREEN... Saves Nature

Drizzle - General Features

Drizzle is a specially formulated MOSITURE RESISTANT plaster from Gypelite specifically for wet area applications.

  • Moisture resistant.
  • Great workability.
  • Resist moulds.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 70-75%.
  • Initial Setting Time : 15mins.
  • Compressive strength : >1N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage: 9.5-10kg/m2 (for 10 mm thickness).

Applications

  • Gypelite Drizzle plasters can be used in all areas which are prone to moisture.

Vintage - General Features

Vintage is an accelerated setting time product from Gypelite with a superior strengthened matrix.

  • Great strength.
  • Fast setting.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 70-75%.
  • Initial Setting Time : 8-12mins.
  • Compressive strength : >1N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage: 9.5-10kg/m2 (for 10 mm thickness).

Applications

  • Gypelite Vintage plasters can be used for applications like making moulds, idols, cornices etc. Also ideal for wall applications where fast setting is required.

AMAZE - General Features

Gypelite Amaze is an extended setting time product offering consistent performance.

  • Consistent performance.
  • Elongated setting time than vintage.
  • Economical.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 70-75%.
  • Initial Setting Time : 15-20mins.
  • Compressive strength : >1N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage: 9.5-10kg/m2 (for 10 mm thickness).

Applications

  • Gypelite Amaze plasters can be used for wall plastering applications.

Stucco Coat - General Features

General purpose plaster

Gypelite Stucco Coat Tough Plaster is a high purity natural gypsum plaster which is easy to mix and easy to apply providing a smooth dense surface ready to paint.
With a density of 700kg/m3, Stucco coat offers excellent coverage and good finish.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 70-75%.
  • Initial Setting Time : 10-15min.
  • Compressive Strength : > 1 N/mm2.
  • Density : 700-800 kg/m3.
  • Coverage : 9.5-10.5 kg/m2.

Applications

  • Tough plasters can be applied on brick walls, concrete blocks, RCC surfaces, windows and door castings, wall repair works and a lot more.

Continental - General Features

Fire resistant plaster

Gypelite Continental Tough Plasters are specially prepared with enhanced fire-resistant properties.

  • Economic.
  • Energy saving.
  • Good finishing.
  • + All the goodness of STUCCO COAT.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 65-70%.
  • Initial Setting Time : 15min.
  • Compressive Strength : > 1 N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage : 9-10 kg/m2.

Applications

  • Gypelite Continental plasters can be used in any walls, especially in kitchen and chimneys which are prone to fire.

Elegant - General Features

Smooth finishing plaster

Gypelite Elegant is a creamy, white, smooth plaster offering outstanding finishing to your walls.
Elegant plaster provides you a variety of choices to create decorative designs and styles.

  • High quality finish.
  • Low thermal conductivity.
  • Easy to mix and apply.

Hand Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 65-70%.
  • Initial Setting Time : 15min.
  • Compressive Strength : > 1 N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage : 9-10 kg/m2.

Applications

  • Gypelite Elegant plasters can be used in any walls and ceilings and also for designing cornices, arches and domes.

Machine Plaster - General Features

Machine applied plaster

Gypelite Machine Plasters offers advanced and wide coverage. Plaster application is through spraying machine.
Our special formulation enables spray application through machine trouble free.

  • Saves time and money.
  • Easy to mix and apply.
  • Smooth surface.

Machine Application
Always follow mixing instructions.

Technical Specification

  • Water /plaster ratio : 65-70%.
  • Initial Setting Time : 40min.
  • Compressive Strength : > 1 N/mm2.
  • Density : 700-750 kg/m3.
  • Coverage : 9-10 kg/m2.

Applications

  • On any walls and ceilings where ever machine plaster application is possible.